GRINNELL VALVES 格林奈尔蝶阀，格林奈尔阀门，1000系列，8000系列，WC-8100，GHP系列GRINNELL VALVES 格林奈尔蝶阀(现货）
GRINNELL VALVES 格林奈尔蝶阀(现货）
的详细介绍
GRINNELL VALVES 格林奈尔蝶阀 GRINNELL VALVES 格林奈尔蝶阀(现货）
主要包括1000，8000，GHP三大系列
欢迎来到Grinnell阀门公司
Grinnell格林奈尔是工业、商业和建筑市场阀门的领先制造商。
Grinnell格林奈尔阀门采用最先进的加工设备生产。每个阀门在出厂前都经过110%的打压测试，确保每一个阀门的安全可靠。
现货供应GIRNNELL VALVES 美国格林奈尔光杆蝶阀，气动蝶阀，现货口径有：DN80mm,DN100mm,DN150mm等规格。
型号为：
GRINNELL 080 WC-8100/6G/AN150
GRINNELL 100 WC-8100/6G/AN150
GRINNELL 150 WC-8100/6G/AN150
| |
Series 1000 Resilient Seated Butterfly Valves
|
 |
|
BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.
STEM/DISC
Stern design provides high strength and positive disc control with standardized end connection for operator interchangeability.
STEM BEARINGS
Bearings are standard on both the upper and lower shaft to minimize torque and provide maximum stern support.
SEAT
Molded-in resilient seat provides bubble-tight shutoff to 250 psi.
Dead-End Service
The lugged body is drilled and tapped for isolation and removal of downstream piping at full rated pressure.
TESTING
Each valve is individually tested for bubble-tight closure at 110% of full rated pressure.
|
|
Series 1000 Drawings
|
|
 PDF
Wafer Barestem
Wafer Lever Operated
Wafer Gear Operated
Lug Barestem
Lug Lever Operated
Lug Gear Operated
|
| |
Series 8000 Resilient Seated Butterfly Valves
|
 |
|
BODY
One-piece bodies are available in both wafer and full tapped lug designs. The standard longneck body provides full clearance for 2-inches of insulation with ANSI 150 pipe flanges.
STEMS
Heavy-duty, two-piece design allows for easy maintenance. Stems are secured by the use of retaining pins.
BEARINGS
Two bronze or Teflon®* bearings are standard on 2"-12". Sizes above 12" have full-length bearings on upper and lower stems.
Stem/Disc Attachment
Rectangular drive ensures proper disc connection. No pins or bolts are exposed to flow.
Seat
Elastomer, reinforced with phenolic backing ring, enables valve to be used on pressure or vacuum service. Seat can be field replaced. Grinnell's special double seal design eliminates the need for flange gaskets. Three stem seal O-rings are molded into the the seat liner to back up the primary stem seal.
DISC
Streamlined for maximum flow and minimum seat wear. Ease of maintenance due to the elimination of bolts, pins, etc., as disc to stem connectors.
Dead-End Service
A unique patented lip, integral to the body prevents the liner from moving downstream, eliminating seat and flange leakage. This feature allows lug valve to be used in uni-directional, dead-end service applications at full rated pressure without the use of downstream flange.
* Teflon® is a registered trademark of the E.I. DuPont de Neymour Company
|
|
点击图片查看大图
